Drywall Estimate Template With a Priced 12 by 14 Bedroom
For every trade: Contractor Estimate Template With Good, Better, and Best Options
A drywall estimate template lists the board, the finish level, and a price for each option
A drywall estimate template lists the room, the square feet of board, the sheets, the finish level, and a price for each option. In our example, a 12 by 14 foot bedroom with 8 foot ceilings is 584 square feet of board, and it comes to $1,745 finished for flat paint, $2,080 finished and primed, or $2,565 with a full skim coat.
Those prices use materials priced at The Home Depot on November 9, 2026, a labor rate built from Bureau of Labor Statistics pay data, and example hours. Copy the template below, then use the sections after it to put in your own numbers.
For a market check, Angi's drywall installation cost guide, updated October 20, 2026, puts the national average at $2,104 across 14,676 projects, with most homeowners paying $1,000 to $3,253. The same guide lists $1.65 to $3.15 a square foot for a Level 4 finish and $2 to $3.50 for Level 5. Our Good option comes to $2.99 a square foot, near the top of that Level 4 range.
What a drywall estimate needs, in order:
- Your business name, phone, and license number if your state issues one
- The customer, the job address, the date, and the date the price ends
- The rooms and the square feet of board, with the sheet count and type
- The finish level, written as a level, not a word like "smooth"
- Three options and a short list of add-ons
- What is included, what is not, and what the customer provides
- Payment terms and how changes get priced
Copy this drywall estimate template
Fill in the brackets. Delete any line that does not fit the job.
[Your Town] Drywall | [phone] | [email] | License #[number, if your state issues one] Estimate #[number] | Date: [date] | Good through: [date, 30 days out] Customer: [name] | Job address: [address]
Scope Room: [room name], [length] by [width] feet, [height] foot ceilings Surfaces: walls [sq ft] + ceiling [sq ft] = [total] square feet of board Board: [count] sheets of [1/2 or 5/8] inch, [4x8 or 4x12], [regular, mold-resistant, or fire-rated] Work: hang the board, tape and finish all seams, inside corners, screws, and corner bead to the level chosen below, sand, and clean up the dust
Pick one option Good: Level 4 finish, ready for flat paint | $[price] Better: Level 4 finish plus one coat of drywall primer | $[price] Best: Level 5 skim coat plus primer, for eggshell, satin, or gloss paint | $[price]
Add-ons you can choose Knockdown texture on the ceiling, [sq ft] | $[price] Mold-resistant board in place of regular, per sheet | $[price] Haul away scraps and empty buckets | $[price]
Included: all board, screws, tape, joint compound, corner bead, and sanding supplies. Not included: painting, framing repairs, electrical work, insulation, and moving furniture, unless listed above. You provide: a clear room, power, and heat of at least 55°F while we finish. Schedule: [number] visits over about [number] days, because each coat dries before the next. Payment: [deposit, if any] at approval, balance when the job is done. Card, check, or cash. Changes: extra work gets a written price before we do it. Price: good through [date]. After that, we recheck material prices before we start.
The 55°F line comes from USG's instructions for its joint compound, covered in the terms section below.
Measure the board, not the floor
Price drywall by the square feet of board that goes up, not the floor area. Measure each wall's length times its height, then add the ceiling's length times its width.
Here is the example bedroom, 12 by 14 feet with 8 foot ceilings:
| Surface | Math | Square feet |
|---|---|---|
| Two 12 foot walls | 2 x 12 x 8 | 192 |
| Two 14 foot walls | 2 x 14 x 8 | 224 |
| Ceiling | 12 x 14 | 168 |
| Total | 584 |
Count sheets by layout, not by division. A 4x12 sheet is 48 square feet, and 584 ÷ 48 is 12.2, but you can't buy 0.2 of a sheet or bend one around a corner. Laid out the long way, each 12 foot wall takes 2 sheets, each 14 foot wall takes 3, and the ceiling takes 4. That is 14 sheets, or 672 square feet of board, 15% more than the surface. The example doesn't subtract the door and window. The offcuts from those openings are the waste.
We use 4x12 sheets because they leave fewer butt joints, the short-end seams that are hardest to hide. A 4x8 sheet costs less, but you hang more of them and tape more seams.
Count the tape from the seams. In this room, the seam halfway up each wall is 52 feet, the butt joints on the 14 foot walls add 16, the four inside corners add 32, the corner where the walls meet the ceiling adds 52, and the ceiling seams add 36. That is about 188 feet, so one 500 foot roll is plenty.
Count the mud from USG's coverage. USG's submittal sheet for Sheetrock UltraLightweight All Purpose Joint Compound says coverage is "approximately 9 to 10 gals/1,000 sq. ft. of gypsum panels." For 584 square feet, that is 5.3 to 5.8 gallons. One 4.5 gallon pail is short, so the example buys two.
Material prices, opened November 9, 2026
These are Home Depot prices for a store in Seekonk, Massachusetts, opened November 9, 2026. Home Depot notes that local store prices may vary, so check your own store or supply yard before you send an estimate.
| Item | Price | Example uses | Line total |
|---|---|---|---|
| 1/2 in. 4x12 Sheetrock UltraLight sheet | $27.25 | 14 | $381.50 |
| 4.5 gal UltraLightweight joint compound | $26.50 | 2 | $53.00 |
| 500 ft paper joint tape | $8.38 | 1 | $8.38 |
| 8 ft metal corner bead | $3.98 | 3 | $11.94 |
| 5 lb box, 1-5/8 in. coarse drywall screws | $25.98 | 1 | $25.98 |
| Total | $480.80 |
The 3 pieces of corner bead are an example allowance for outside corners, such as a window wrapped in drywall instead of wood trim. Count the outside corners on your own job.
Other prices you may need on the same day:
- 1/2 in. 4x8 UltraLight sheet: $16.28, or 51 cents a square foot. The 4x12 is 57 cents a square foot.
- 1/2 in. 4x8 mold-resistant sheet: $22.98, or 72 cents a square foot.
- Glidden PVA drywall primer, 5 gallons: $68.00. Glidden's data sheet says it covers approximately 250 to 300 square feet a gallon on smooth surfaces, so one coat on 584 square feet takes about 2 to 2.3 gallons.
Quantity changes the price. The same 4x12 sheet is $20.44 when you buy 34 or more, 25% less than $27.25. The 14 sheet bedroom doesn't reach that price, but a basement does. Reprice the board for each job size instead of reusing one number.
Add a markup to materials. The example adds 15% to cover the pickup trip, broken sheets, and the price moving before you buy. That makes $480.80 into $552.92. Pick your own number and use it every time.
Price labor from what an hour really costs you
The labor rate on an estimate has to cover the wage, the cost of employing someone, the hours nobody pays for, and your overhead and profit. Every number after the wage is an example.
- Wage. The Bureau of Labor Statistics puts median pay for drywall installers, ceiling tile installers, and tapers at $28.74 an hour in 2025. Tapers alone earned a median of $68,270 a year in May 2025, more than the $58,930 for installers.
- Cost to employ. In construction, wages were 69.5% of total compensation in June 2026. The rest is payroll taxes, insurance, and benefits. So $28.74 ÷ 0.695 = $41.35 an hour.
- Hours nobody pays for. Driving, buying board, and writing estimates are paid hours you can't bill. If 6 of every 8 paid hours are billable, each billable hour carries $41.35 x 8 ÷ 6 = $55.14.
- Overhead and profit. The truck, the drywall lift, insurance, the phone, and the profit that lets you grow. Adding 50% gives $55.14 x 1.5 = $82.71. Round to $85 an hour.
If you work alone, the math is the same: start from the wage you want to pay yourself, then add self-employment tax, the hours you can't bill, and your business costs.
If you quote by the square foot instead of by the hour, keep the hours on your own copy of every job, so you can tell whether a room type pays. When costs go up, our guide on how to raise your prices shows how many customers you can afford to lose.
Worked example: a 12 by 14 foot bedroom priced at $1,745
This is the Good option, a Level 4 finish ready for flat paint. The hours are example hours for a two-person crew on new framing. Time your own crew on the next three rooms and use those.
| Step | Day | Example hours |
|---|---|---|
| Hang 14 sheets, two people for 3 hours | 1 | 6 |
| Tape seams and corners, set corner bead | 2 | 3 |
| Second coat | 3 | 2 |
| Third coat | 4 | 1.5 |
| Sand, touch up, and clean | 5 | 1.5 |
| Total | 14 |
USG's instructions for the compound say to embed the tape, "Let dry and sand lightly," then apply a second coat, let it dry, and apply a third. Each coat is a trip, which is why a small room costs more per square foot than a basement.
The price:
| Line | Math | Amount |
|---|---|---|
| Materials | $480.80 + 15% | $552.92 |
| Labor | 14 hours x $85 | $1,190.00 |
| Total | $1,742.92 |
Quote it as $1,745. That is $1,745 ÷ 584 = $2.99 a square foot of board.
That sits near the top of Angi's Level 4 range of $1.65 to $3.15, which fits one small room with five trips. If a big job comes out well above a range like that, look at your hours first.
These are example numbers. The arithmetic is exact.
Sam is the AI office manager that never sleeps.
He books jobs, sends invoices, and answers your customers, all by text. He checks with you before anything goes out.
Free plan, no credit card. Sam answers new customers on Pro. Or text (833) 365-7267.
Hi, I'm Sam. Text me what you need done and I'll take care of it.
How do I get started?
Good, better, and best options are levels of finish
For drywall, the three options are levels of finish. Finish levels run from Level 0 to Level 5, and National Gypsum's summary says what each one is for:
- Level 3 is "typically specified in appearance areas that will receive heavy or medium texture finishes." It is "not recommended for smooth wall designs," so it is not an option for a painted bedroom.
- Level 4 is "typically specified in appearance areas where smooth wall designs are going to be decorated with flat paints." It is "not recommended in spaces where non-flat or dark/deep-tone paints" will go on.
- Level 5 adds "a skim coat of joint compound" over "the entire surface," for "non-flat paints, glossy or decorative finishes."
USG's compound instructions say the same thing from the other side: where walls get "severe artificial or natural side lighting" and a gloss paint such as eggshell, semigloss, or gloss, the surface "should be skim coated."
Here is the example bedroom as three options:
| Option | What the customer gets | Adds to Good | Price |
|---|---|---|---|
| Good | Level 4, ready for flat paint | $1,745 | |
| Better | Level 4 plus one coat of PVA primer | $333.20 | $2,080 |
| Best | Level 5 skim coat plus primer | $819.15 | $2,565 |
How the steps up were priced, as examples:
- Better adds the primer, $68.00 + 15% = $78.20, and 3 hours to roll it, $255. That is $333.20.
- Best adds the Better items, plus two more pails of compound for the skim coat, $53.00 + 15% = $60.95, and 5 hours to skim and sand, $425. That is $819.15 over Good.
Best works out to $4.39 a square foot, above Angi's Level 5 range of $2 to $3.50, because one small room still needs the extra trip and a full sand. If Best never sells, recheck your skim hours.
Put the paint sheen in each option's name. A customer who plans to use satin paint can then pick Best without asking you.
Add-ons are extras the customer can say no to
An add-on is a line the customer can tick or skip without changing the main job. Keep the list short, and price each one on its own.
| Add-on | How it is priced | Example price |
|---|---|---|
| Knockdown texture on the ceiling, 168 sq ft | Angi lists $1 to $1.95 a square foot for texture; the example uses $1.50 | $252 |
| Mold-resistant board, per 4x8 sheet swapped | $22.98 minus $16.28 is $6.70, plus 15% | $8 a sheet |
| Haul away scraps and empty buckets | Your dump fee and the trip | $75 |
The texture range is from Angi's guide, and the sheet prices are the Home Depot prices above. The haul-away price is an example.
Leave out anything the job can't be done without. A framing repair before you can hang belongs in the scope or a written change price, not in an add-on. Our contractor estimate template uses the same options and add-ons layout for other trades. If a painter follows you, the painting estimate template prices the same kind of bedroom for paint.
Make the price good for 30 days, and put the terms on the estimate
Write the date your price ends on the estimate, and say what happens after it. The example uses 30 days, because board prices move.
The Producer Price Index for gypsum products, published by the Bureau of Labor Statistics and charted by the St. Louis Fed, went from 475.063 in May 2026 to 488.936 in September 2026. That is a 2.9% rise in four months. The index had drifted down from 482.101 in September 2025 before that, so the full year was up 1.4%. A 30 day window keeps your price close to what you will pay at the yard.
Three terms worth writing on every drywall estimate:
- Heat. USG's instructions say that during finishing, "temperatures within the building shall be maintained at a minimum of 55 °F (13 °C)." In a cold basement or a new addition in winter, say who supplies the heat.
- Old paint. In homes built before 1978, the EPA's lead rule covers paid work that disturbs paint. Small interior jobs of "six square feet or less of paint per room" are exempt, but demolition of painted surfaces is covered "regardless of square footage," and firms doing covered work must be certified. If the job tears out painted drywall in an older house, say so on the estimate.
- Three-day right to cancel. The FTC's Cooling-Off Rule covers sales with a purchase price of $25 or more made at the buyer's residence. When it applies, the customer can cancel until midnight of the third business day after the sale. If customers agree to jobs in their homes, check whether the rule covers you. This is not legal advice.
Once the customer says yes and the job is done, send the invoice the same day. Our guide to how to write and send an invoice has a template.
Follow up 3 days after you send it, then before the price ends
An estimate that goes quiet is not always a no. The customer may be busy or comparing prices. Three short follow-ups cover it.
- Day 3: a short text that makes it easy to answer.
- Day 10: a call. A question about the options is easier to answer by voice.
- 3 days before the good-through date: a last text with the date.
Copy and change these:
Hi [Name], it's [Your name] at [Business]. Just checking you got the estimate for the [room]. Happy to answer any questions about the three options.
Hi [Name], it's [Your name]. If you're still deciding between Good and Best for the [room], the difference is the paint you plan to use. Flat paint looks right on Good. Eggshell or satin needs Best.
Hi [Name], the price on your [room] estimate is good through [date]. After that I'll need to recheck board prices. Want me to hold a start date for you?
After the third message, stop. If they come back later, recheck the material prices before you start.
Where ServicePro fits
ServicePro is home services software, and every business, Free plan included, can send estimates with options and add-ons. You build Good, Better, and Best and the add-on lines, and the customer opens the estimate on their phone, picks an option, ticks the add-ons they want, and approves it, with no login. The approved lines become the work on the job, so you can invoice it and take card payments through a pay link. Estimates with no answer after three days show up for you with Text and Call buttons.
ServicePro estimates have no e-signature, no photos, no expiry date field, no sales tax line, and no PDF to print, and nothing follows up with the customer for you. Write the good-through date in the estimate and send the follow-ups yourself. The Free plan also builds a website from your Google Business Profile, with five service pages and a booking page where customers request a time. Get the free website.
How this post was made: drafted with AI from the sources linked on this page. Figures and links were checked on November 9, 2026.
Frequently Asked Questions
What should a drywall estimate include?
A drywall estimate should list the room, the square feet of board, the sheet count and type, the finish level, and a price for each option, plus add-ons, what is included and not, payment terms, and the date the price ends. In our example, a 12 by 14 foot bedroom is 584 square feet of board and 14 sheets, priced at $1,745, $2,080, or $2,565 for three finish options.
How much should I charge per square foot for drywall?
Angi's guide, updated October 20, 2026, lists $1.65 to $3.15 a square foot for a Level 4 finish and $2 to $3.50 for Level 5. Build your own price from materials, a markup, and your hours at a real labor rate, then compare. Our example bedroom came to $2.99 a square foot for Level 4, near the top of the range because one small room takes five trips.
How many sheets of drywall do I need for a 12 by 14 room?
A 12 by 14 foot room with 8 foot ceilings has 584 square feet of walls and ceiling. Counted by layout, it takes 14 sheets of 4x12 drywall: 2 for each 12 foot wall, 3 for each 14 foot wall, and 4 for the ceiling. That is 672 square feet of board, about 15% more than the surface, with the door and window offcuts as the waste.
How much joint compound do I need for drywall?
USG's submittal sheet for Sheetrock UltraLightweight All Purpose Joint Compound gives coverage of approximately 9 to 10 gallons per 1,000 square feet of gypsum panels. For a 584 square foot bedroom, that is 5.3 to 5.8 gallons, so buy two 4.5 gallon pails. A Level 5 skim coat over the whole surface takes more; our example adds two more pails.
How long should a drywall estimate be valid?
Pick a number and write the date on the estimate; our example uses 30 days. The Producer Price Index for gypsum products rose 2.9% from May to September 2026, so a short window keeps your price close to what you pay at the yard. After the date, recheck material prices before you start.
What is the difference between a Level 4 and Level 5 drywall finish?
Level 4 is the usual finish for smooth walls that get flat paint, with the seams taped and coated and the screws covered. Level 5 adds a skim coat of joint compound over the entire surface, for eggshell, satin, or gloss paint and strong side light. In our example bedroom, Level 4 is $1,745 and Level 5 with primer is $2,565, because the skim coat adds compound, hours, and a trip.
How do I figure the labor rate for a drywall estimate?
Start with the wage. The BLS median for drywall installers and tapers was $28.74 an hour in 2025. Divide by 0.695, since wages were 69.5% of construction compensation in June 2026, to get $41.35. Add the hours you can't bill and your overhead and profit. With 6 of 8 hours billable and 50% added, the example rate rounds to $85 an hour.

