Plumbing Invoice Template: Copy It, With a Water Heater Example
For every trade: Contractor Invoice Template: 9 Parts, a Copy-and-Paste Example
A plumbing invoice template needs 12 lines, starting with your license number
A plumbing invoice needs 12 lines: your business and license number, the customer and job address, an invoice number, the dates and terms, the job, materials, labor, the permit, the subtotal, any deposit, the balance due, and how to pay. In Texas, the first page must also show the master plumber's name, license number, and the state board's contact details, under Texas State Board of Plumbing Examiners rule 367.10. Copy the template below, fill in the brackets, and send it before you leave the job.
INVOICE [number]
From: [Business name], [mailing address], [phone], [email]. License: [state plumbing license number]
To: [Customer name], [billing address]. Job address: [where you did the work]
Invoice date: [date]. Work done: [date or dates]. Due: [terms], [due date]
Job: [one plain sentence that matches the estimate the customer approved]
Materials: [part], [size or model], [quantity], $[amount]. One line for each part, or "included in the flat price"
Labor: [hours] hours at $[rate], or flat price $[amount]
Service call fee: $[amount], only if you quoted it before the visit
Permit: [city or county] permit [number], $[amount]
Subtotal: $[amount]. Sales tax: $[amount], only if your state taxes this work
Deposit received [date]: minus $[amount]
Balance due: $[amount]
Pay by: card at [pay link], bank transfer to [account details], check to [business name] at [mailing address], or cash
Late fee: [the terms the customer agreed to before the job, or leave this line off]
The service call fee, sales tax, and late fee are optional. Use each one only when it applies and the customer knew about it before you started.
Our guide on how to write and send an invoice covers numbering, sending, and keeping records. This page covers what is different for plumbers: the Texas license notice, the permit on a water heater swap, how Texas taxes a plumbing bill, and deposit limits.
What every plumbing invoice needs, line by line
Each line answers a question the customer would otherwise call you about. Stripe's invoice guide says to "assign a unique identification number to each invoice," that "a common practice is to use sequential numbers," and to "clearly state the terms of payment." The IRS lists invoices among the documents that show gross receipts, so the same numbers help at tax time.
| Line | What to write |
|---|---|
| Business and license | Name, address, phone, email, and plumbing license number |
| Customer and job address | Who pays, and where the work was. A landlord often pays from another address |
| Invoice number | A number you never reuse |
| Dates and terms | Invoice date, work date, the term, and the due date |
| Job | One plain sentence that matches the approved estimate |
| Materials | Each part with its size or model, or "included in the flat price" |
| Labor | Hours and rate, or one flat price |
| Permit | The city or county, the permit number, and the fee |
| Subtotal | Before tax, with tax shown only where your state taxes the work |
| Deposit | The date and amount already paid |
| Balance due | The total minus any deposit, in bold |
| How to pay | Pay link, bank transfer, check address, and cash |
Write the job the way the customer would say it. "Replaced the leaking 40-gallon gas water heater in the garage" gets paid. "Plumbing services" gets a phone call.
Put the size or model on every part, even on a flat price. When the customer calls again in eight years, the invoice tells you what is in the garage.
If you charge a service call or diagnostic fee, say the amount on the phone before the visit and put it on its own line. A fee the customer hears about for the first time on the invoice is the line they argue with.
Texas plumbers must print the master plumber's name, license, and board notice
Texas has the most specific invoice rule for plumbers that we found. Under rule 367.10(b) of the Texas State Board of Plumbing Examiners, the first page of "each written or electronic proposal, invoice or contract for plumbing services" must include, "in at least twelve-point font":
- the first and last name of the Responsible Master Plumber (RMP) of record
- the license number of the RMP of record
- the phrase "regulated by the Texas State Board of Plumbing Examiners"
- the board's mailing address, phone number, and website address
The rule says this covers "written estimates, service invoices, billing invoices, receipts or any document, written or electronic, which defines the services and cost of the plumbing services provided to the consumer." So the estimate, the invoice, and the paid receipt all need it. The board's penalty table lists leaving it off a proposal, estimate, invoice, or contract as a Class B violation with a $1,000 penalty.
Here is the line, ready to paste at the top of the first page. The address and phone number are the ones on the board's contact page on November 8, 2026, which lists Cameron Road as its new address as of September 2025:
[First and last name of the Responsible Master Plumber], License [RMP license number]. Regulated by the Texas State Board of Plumbing Examiners, 7915 Cameron Road, Austin, TX 78754, (512) 936-5200, tsbpe.texas.gov
The same rule reaches past the invoice. The RMP's license number and the company name go on both sides of every service vehicle, after the letters "M", "MPL", or "RMP", in letters "at least two inches in height" (rule 367.10(a)). Business cards, flyers, and other ads must state the RMP's license number too (rule 367.10(c)).
Other states set their own rules. Ask your state plumbing board what has to appear on an invoice, and keep your license number on every one even where it isn't required.
A worked example: a gas water heater swap in San Antonio
Here is the template filled in for a common job. The flat price is an example to show the arithmetic, not a price to charge. The permit fee comes from the City of San Antonio.
San Antonio runs a Limited Service and Repair (LSR) permit for small jobs, according to the city's Information Bulletin 121c, revised September 25, 2026. It covers "replacement of an existing water heater connected to an existing venting system, gas and/or electric circuit in the same location," and leaves out a change of type or size (tank to tankless, gas to electric) and work "generally valued at more than $2,000." The licensed contractor gets the permit "within three working days from the completion of the work."
The LSR application form in the same bulletin lists a $57.50 plumbing permit base fee, $9.20 for a gas or electric water heater, a 4% surcharge, and an $11.50 processing fee (City of San Antonio). Reading the form as the 4% applying to the base fee and the water heater, that is $57.50 + $9.20 = $66.70, plus $2.67, plus $11.50, for $80.87. The city's BuildSA portal shows the final figure when you apply, so use that number.
Sarah M.'s water heater is leaking. Dave, a master plumber, quotes a flat $1,650.00, which keeps the job under the LSR limit, swaps it the same morning, applies for the permit from the truck, and sends the invoice before he leaves.
INVOICE 2047
[First and last name], Responsible Master Plumber, License [RMP license number]. Regulated by the Texas State Board of Plumbing Examiners, 7915 Cameron Road, Austin, TX 78754, (512) 936-5200, tsbpe.texas.gov
From: [Your Town] Plumbing, [mailing address], San Antonio, TX, [phone], [email]
To: Sarah M., [billing address]. Job address: same
Invoice date: November 4, 2026. Work done: November 4, 2026. Due: on receipt
Job: Removed the leaking 40-gallon gas water heater and installed a new 40-gallon gas water heater in the same garage location, on the existing vent and gas line. New gas connector, water connectors, and thermal expansion tank. Old heater hauled away
| Line | Amount |
|---|---|
| Water heater replacement, flat price: 40-gallon gas heater [model], expansion tank, connectors, labor, and haul-away | $1,650.00 |
| City of San Antonio LSR plumbing permit [number] | $80.87 |
| Balance due | $1,730.87 |
Pay by: card at [pay link], or check to [Your Town] Plumbing at [mailing address].
Check the math: $1,650.00 + $80.87 = $1,730.87. There is no deposit, since Dave buys the heater the same morning, and no late fee line, since he didn't agree one with Sarah first. There is no sales tax line either, and the next section explains why.
In Texas, a flat price and an itemized bill are taxed differently
In Texas, the way you write the price decides whether you charge the customer sales tax. The Texas Comptroller's publication 94-116, on real property repair and remodeling, says: "Labor to repair, remodel, or restore residential real property is not taxable." Materials are another matter, and the publication gives two ways to handle them:
| Contract type | What you do about sales tax (Texas Comptroller) |
|---|---|
| Lump-sum: one price for the job | "You pay tax on all your supplies, materials, equipment, and taxable services when you buy them. You don't charge your customer tax." |
| Separated: materials priced on their own | You can give suppliers a resale certificate for the materials, then "collect state sales tax, plus any local tax, from your customer on the amount you charge for the materials." |
That is why the worked example lists the parts by name and model but puts one flat price on them. Sarah sees what went into her garage, and Dave pays the tax at the supply house instead of adding a tax line.
If you price materials separately on a residential job in Texas, the invoice needs a sales tax line on the materials. Pick one way and use it on the estimate and the invoice alike. The publication is dated March 2007, so confirm the current rules with the Comptroller or your accountant before you change how you bill.
Other states tax plumbing work differently, and some tax the labor too. Add the tax line in the template only if your state taxes the work.
Payment terms: due on receipt, Net 15, or Net 30
Payment terms say when the money is due. Agree on them on the estimate, then repeat them on the invoice, so nothing on the bill is a surprise.
| Terms | What it means (Stripe) | Use it for |
|---|---|---|
| Due on receipt | Also called Net 0: pay when the work is handed over | Service calls, drain clearing, and same-day water heater swaps |
| Net 15 | Pay within 15 days of the invoice date | Homeowners on bigger jobs, like a repipe billed in stages |
| Net 30 | Pay within 30 days of the invoice date | Property managers, builders, and businesses that ask for it |
Most plumbing calls fit due on receipt. The customer is home, the water is back on, and the job is fresh in their mind.
Always write the date next to the term: "Net 15, November 19, 2026." A customer who sees only "Net 30" may count from the day they open the email.
Net 30 means you carry the job for a month. In the example, Dave paid for the water heater at the supply house and the $80.87 permit before he was paid. On Net 30 he would wait until December 4, 2026 for $1,730.87. If a property manager asks for Net 30, ask for Net 15 first. Stripe also suggests a small discount of 1% to 2% for early payment.
Sam is the AI office manager that never sleeps.
He books jobs, sends invoices, and answers your customers, all by text. He checks with you before anything goes out.
Free plan, no credit card. Sam answers new customers on Pro. Or text (833) 365-7267.
Hi, I'm Sam. Text me what you need done and I'll take care of it.
How do I get started?
Late fees must be agreed first, and Texas sets a general limit of 10% a year
A late fee you add after the job is a fee the customer will fight. Put it on the estimate the customer approves, then repeat it on the invoice:
Late fee: [rate] per year on any balance unpaid [number] days after the due date, as agreed on the estimate dated [date].
States limit late fees and interest, and Texas shows how. Chapter 302 of the Texas Finance Code sets two rules:
- With no agreement, section 302.002 says that if a creditor "has not agreed with an obligor to charge the obligor any interest," the creditor may charge "legal interest at the rate of six percent a year" beginning on "the 30th day after the date on which the amount is due."
- The ceiling, in section 302.001(b): "The maximum rate or amount of interest is 10 percent a year except as otherwise provided by law." A greater rate "is usurious unless otherwise provided by law."
On the $1,730.87 example, 6% a year is $103.85 a year, or about $8.65 a month, starting 30 days after the due date. At 10% a year, it is $173.09 a year, about $14.42 a month. These are example calculations.
The same section 302.002 says that if the customer agrees to pay "any compensation that constitutes interest," they are treated as having agreed to the rate it works out to. A late fee can count as interest under that rule. A fee of 1.5% a month works out to 18% a year, which is above the 10% in section 302.001(b). Ask a Texas attorney before you put a late fee on your invoices.
Other states set different limits. Check yours before you add one. This is general information, not legal advice.
Deposits on plumbing work, and California's $1,000 cap
A deposit pays for parts before you start and shows the customer is serious. Some states limit how much a contractor can take up front on work at a home.
California has the clearest rule. The Contractors State License Board says "the down payment cannot be more than $1,000 or 10 percent of the contract price, whichever is less," that "there are no exceptions for special-order materials," and that after the down payment, "the payments to the contractor cannot exceed the value of the work performed" (CSLB).
No exception for special orders matters to plumbers. A wall-hung toilet, a tankless heater, or a custom shower valve you order for one customer still counts under the cap. For example:
| Job (example prices) | 10% of price | Largest down payment in California |
|---|---|---|
| $1,650 water heater swap | $165.00 | $165.00 |
| $4,800 tankless conversion | $480.00 | $480.00 |
| $16,000 whole-house repipe | $1,600.00 | $1,000.00 |
On the repipe, bill the rest in stages, and keep each bill at or below the value of the work done so far: rough-in after inspection, then the final after the walls are patched.
Emergency calls follow a different contract type. The CSLB says a service and repair contract "covers emergency repairs or services that are requested by the consumer on short notice," and "the total contract price for labor and materials must be under $750" (CSLB). It comes with its own rules, so read them if you take emergency calls in California.
Show any deposit as its own line on the invoice, with the date it was paid. Other states set different limits or none, so check yours.
Make the invoice easy to pay with a card pay link, a QR code, or a bank transfer
The fastest invoice to pay is one the customer can pay from their phone before you pull out of the driveway. Five habits help:
- Send it before you leave. Walk the customer through the work, then send the invoice from the truck.
- Put the pay link first. If your invoicing tool gives you a card pay link, make it the first way to pay.
- Show the pay link as a QR code. The customer scans it from your phone and pays on the spot, with no typing.
- Offer a bank transfer for big bills. On a repipe, ACH costs far less than a card.
- Write the due date, not just the term. "Due November 19, 2026" leaves nothing to count.
Here is what each way costs at Stripe's published US rates, which are 2.9% + 30¢ per domestic card charge and 0.8% capped at $5.00 for ACH Direct Debit:
| Way to pay | Rate | Cost on $1,730.87 | Cost on $4,800 |
|---|---|---|---|
| Card | 2.9% + 30¢ | $50.50 | $139.50 |
| Bank transfer (ACH) | 0.8%, capped at $5.00 | $5.00 | $5.00 |
| Check or cash | No processing fee | $0.00 | $0.00 |
As an example of the math: $1,730.87 x 2.9% = $50.20, plus 30¢ is $50.50. On $1,730.87, 0.8% is $13.85, so the $5.00 cap applies. Stripe adds 1.5% for international cards. Other processors charge different rates.
When the due date passes, send one polite reminder with the pay link. Our plumbing marketing guide covers winning the next job, and plumbing leads covers what each source of calls costs.
Where ServicePro fits
ServicePro is home services software. Every business on it, Free or Pro, can send invoices with a card pay link, and the pay link has a QR code the customer scans from your phone to pay on the spot. Estimates with options and add-ons go to the customer's phone, and the customer approves with no login. Every business can also print a QR code that opens its booking page, website, or Google review page, and the booking page code fits on your truck next to your license number.
ServicePro invoices have no sales tax line, no late fee, and no spot for the Texas board notice, and ServicePro doesn't print invoices or make PDFs. If you need those, use the template above. The Free plan builds a website from your Google Business Profile, with five service pages and a booking page where customers request a time. Compare tools in plumbing software. Get the free website
How this post was made: drafted with AI from the sources linked on this page. Figures and links were checked on November 8, 2026.
Frequently Asked Questions
What should a plumbing invoice include?
A plumbing invoice needs 12 lines: your business and license number, the customer and job address, an invoice number, the dates and terms, the job, materials, labor, the permit, the subtotal, any deposit, the balance due, and how to pay. Add a service call fee, sales tax, or a late fee only when it applies and the customer knew first. In Texas, the first page also needs the master plumber's name, license number, and the state board's contact details.
Do Texas plumbers have to put their license number on invoices?
Yes. Texas State Board of Plumbing Examiners rule 367.10(b) says the first page of each written or electronic proposal, invoice, or contract must show, in at least twelve-point font, the Responsible Master Plumber's name and license number, the phrase "regulated by the Texas State Board of Plumbing Examiners," and the board's address, phone, and website. The board's penalty table lists leaving it off as a $1,000 violation.
Do plumbers charge sales tax in Texas?
On residential repair, labor is not taxable, according to Texas Comptroller publication 94-116. Under a lump-sum contract, you pay tax on materials when you buy them and don't charge the customer tax. Under a separated contract, you collect state and local sales tax from the customer on the materials charge. Pick one way for the estimate and the invoice, and confirm with the Comptroller or your accountant.
Can a plumber charge a late fee in Texas?
Only within the limits of Texas law. Finance Code section 302.001(b) sets a maximum of 10 percent a year unless another law provides otherwise. With no agreement, section 302.002 allows 6 percent a year starting the 30th day after the amount is due. On a $1,730.87 invoice, 6 percent is about $8.65 a month. Agree any late fee on the estimate first, and ask a Texas attorney. This is not legal advice.
How much deposit can a plumber ask for in California?
In California, the Contractors State License Board says the down payment on home improvement work cannot be more than $1,000 or 10 percent of the contract price, whichever is less, with no exceptions for special-order materials. On a $1,650 water heater swap, that is $165. On a $16,000 repipe, it is $1,000. Later payments cannot exceed the value of the work performed. Other states set different limits or none.
What does Net 30 mean on a plumbing invoice?
Net 30 means payment is due within 30 days of the invoice date. Net 15 means 15 days, and due on receipt, which Stripe calls Net 0, means the customer pays when the work is handed over. Most plumbing service calls fit due on receipt. Write the actual date next to the term, such as "Net 30, December 4, 2026," so the customer doesn't count from the day they open it.
How much does it cost to take a card payment on a plumbing invoice?
At Stripe's published US rates, a domestic card payment costs 2.9% + 30¢, and an ACH bank transfer costs 0.8%, capped at $5.00. On a $1,730.87 water heater invoice, a card costs $50.50 and ACH costs $5.00. International cards add 1.5%. Other processors charge different rates, so check yours, and offer a bank transfer on big jobs like a repipe.

