Contractor Invoice Template: 9 Parts, a Copy-and-Paste Example

Tim Wheeler, Co-founder of ServicePro.coTim WheelerCo-founder, ServiceProLast updated November 8, 2026Checked by Tim Wheeler on November 8, 202615 min readMarketing
Contractor Invoice Template: 9 Parts, a Copy-and-Paste Example

A contractor invoice template has nine parts

A contractor invoice has nine parts: your business and license number, the customer and job address, an invoice number and dates, what you did, materials, labor, other charges such as permits, any deposit already paid, and the payment terms with how to pay. Copy the template below, fill in the brackets, and send it the day you finish the job.

Stripe's invoice guide says to put the word "invoice" at the top, "assign a unique identification number to each invoice," and "clearly state the terms of payment." The template does all three. Our guide to how to write and send an invoice covers numbering, sending, and how long to keep invoices. This page is the contractor version, with materials, labor, permits, deposits, and late fees.

INVOICE [number]
From: [Business name], [mailing address], [phone], [email]. License: [number, if your state licenses your trade]
To: [Customer name], [billing address]. Job address: [where you did the work]
Invoice date: [date sent]. Work done: [date or dates]. Due: [due date]
Job: [one sentence on what you did, in the words the customer used]
Materials: [item, quantity, price each, line total]
Labor: [hours] at [rate], or [flat price for the job]
Other charges: [permit, disposal, trip charge, each on its own line]
Subtotal: [amount]. Sales tax: [amount, if your state taxes it]. Deposit paid on [date]: minus [amount]
Balance due: [amount]
Terms: [Due on receipt, Net 15, or Net 30]. Pay by [card link, bank transfer, Zelle to (phone), or check to (business name) at (address)]
Late balances: [your agreed late fee, or leave this line off]

Keep the materials and labor on separate lines. A customer who sees "Water heater, $780" and "Labor, 3 hours" can check each one, and there is less to argue about than one number for the whole job.

What each line on a contractor invoice is for

Each line answers a question the customer, or their bank, will ask later. Leave one out and you get a phone call before you get paid.

LineWhat to writeWhy it matters
Business and licenseName, address, phone, email, license numberThe customer can look you up and knows who to pay
Customer and job addressBilling name and address, plus where the work wasLandlords and property managers often pay from a different address
Number and datesA number you never reuse, the invoice date, the work date, the due dateStripe says to "assign a unique identification number to each invoice" (Stripe)
JobOne plain sentenceMatches the estimate the customer approved
MaterialsEach part with quantity and priceShows where the money went
LaborHours and rate, or one flat priceHourly jobs need the hours; flat-rate jobs don't
Other chargesPermit, disposal, trip chargePass-through costs stay visible
Deposit and balanceWhat they already paid, and what is leftStops a customer paying twice, or not at all
Terms and how to payThe due date and every way you take moneyStripe says to "clearly state the terms of payment" (Stripe)

Write the job the way the customer said it. If they called about "no hot water," write "Replaced 50-gallon gas water heater (no hot water)." That one line lets them match the bill to the visit months later.

Flat rate or time and materials, show what you quoted. If you quoted a flat price, bill the flat price and list the main parts underneath with no prices. If you quoted time and materials, list every part and every hour. Either way, the invoice should look like the estimate the customer said yes to.

Sales tax depends on your state. Whether you charge it, and on which lines, is a question for your state. Our invoice guide links to the state tax agencies and the questions to ask them.

A worked example: a plumber's water heater invoice

Here is the template filled in for a common plumbing job. The prices are example numbers to show the arithmetic, not prices to charge. Our plumbing marketing guide covers how plumbers win jobs like this one.

Sarah M. calls on a Thursday morning because she has no hot water. Dave, a plumber who works alone, finds the tank leaking and replaces it that afternoon.

INVOICE 2047
From: Dave's Plumbing, [mailing address], [phone], [email]. License: [number]
To: Sarah M., [billing address]. Job address: same
Invoice date: November 5, 2026. Work done: November 5, 2026. Due: on receipt
Job: Replaced leaking 50-gallon gas water heater (no hot water)
LineAmount
50-gallon gas water heater$780.00
Fittings, gas flex line, and vent connector$65.00
Labor: remove old heater, install and test new one, 3 hours at $125.00$375.00
City plumbing permit$75.00
Haul away old heater$40.00
Sales tax (this example assumes none applies)$0.00
Balance due$1,335.00
Terms: Due on receipt. Pay by card from the link in this email, by Zelle to [phone], or by check to Dave's Plumbing at [address].

The total checks out: $780 + $65 + $375 + $75 + $40 = $1,335. Dave took no deposit because it was a same-day repair, so there is no deposit line. On a job he schedules for next week, he would add "Deposit paid November 1: minus $[amount]" above the balance.

Dave tells Sarah M. before he leaves that the invoice is in her email, and how she can pay.

Short examples for electrical, HVAC, handyman, and roofing jobs

The same nine parts fit every trade. Only the job, materials, and labor lines change. These are example numbers, not prices to charge.

Electrician, add a 20-amp circuit for a garage freezer

  • Job: Ran new 20-amp circuit from panel to garage outlet
  • Materials: 20-amp breaker, $18.00; 12-gauge wire, 40 feet, $36.00; outlet, box, and cover, $14.00
  • Labor: 2.5 hours at $110.00: $275.00
  • Permit: $60.00
  • Balance due: $403.00

HVAC, fall furnace tune-up, flat rate

  • Job: Furnace tune-up and safety check
  • Flat price: $129.00
  • Added part: furnace filter, 16x25x1, $22.00
  • Balance due: $151.00

Handyman, half day of small repairs, hourly

  • Job: Hung two doors, patched drywall in hallway, replaced bathroom fan
  • Labor: 4 hours at $85.00: $340.00
  • Materials: bath fan, $64.00; drywall patch kit, $16.00
  • Balance due: $420.00

Roofer, repair a wind-damaged back slope, time and materials

  • Job: Replaced missing and torn shingles on the back slope, about 200 square feet
  • Materials: shingles, 6 bundles at $45.00, $270.00; underlayment and drip edge, $85.00; nails and sealant, $20.00
  • Labor: 2 roofers, 5 hours each, 10 hours at $75.00: $750.00
  • Disposal: $60.00
  • Balance due: $1,185.00

Check each one before you send it: $18 + $36 + $14 + $275 + $60 = $403, $129 + $22 = $151, $340 + $64 + $16 = $420, and $270 + $85 + $20 + $750 + $60 = $1,185. A wrong total is the fastest way to get an invoice set aside. Our electrician marketing guide covers getting more of these calls.

Payment terms: due on receipt, Net 15, or Net 30

Payment terms tell the customer when the money is due. Pick one before the job and write it on the estimate, so the invoice holds no surprises.

TermsMeansUse it for
Due on receiptPay when the invoice arrivesHomeowners, repairs, same-day jobs
Net 15Pay within 15 days of the invoice dateHomeowners on bigger jobs, regular customers
Net 30Pay within 30 days of the invoice dateProperty managers, builders, and other businesses that ask for it

Always write the actual date next to the term: "Net 15, due November 20, 2026." A customer who sees only "Net 30" may count from whenever they open the email.

Net 30 means you carry the cost of the materials for a month. In the water heater example, Dave paid for the $780 heater on November 5. On Net 30, he would wait until December 5 to get it back, plus his labor. Ask business customers for Net 15 first.

Texas sets an outer limit for many contractor jobs. Its prompt pay law says an owner who receives a written payment request for properly done work must pay "not later than the 35th day after the date the owner receives the request" (Texas Property Code Chapter 28). A written contract for a single-family home can stretch that to before the 61st day. Other states have their own rules, so check yours.

Put late fees in your terms before the job, and check your state's rules

A late fee you add after the job is a fee the customer will fight. Housecall Pro says late fees and interest "are generally allowed as long as you clearly include them in your terms upfront," and advises you to "avoid adding fees retroactively to existing invoices." It also notes that "late fee limits, interest rules, and grace period requirements vary by state."

Texas is one state that writes the rate into law for construction work. Under Chapter 28 of the Texas Property Code, an unpaid amount the owner owes the contractor "begins to accrue interest on the day after the date on which the payment becomes due," and "bears interest at the rate of 1-1/2 percent each month." The chapter covers contractors who build, alter, or repair improvements on real property, and an attempted waiver of most of it "is void."

For example, if the $1,335 water heater invoice fell under that rule and went unpaid past its due date, 1.5% a month would add about $20.03 for each month it stays unpaid ($1,335 x 0.015 = $20.025). That is an example of the arithmetic, not legal advice about your job.

Two ways to write it, depending on what you agreed:

Late balances: a fee of $[amount] applies to any balance unpaid [number] days after the due date, as agreed on [date of estimate or contract].
Late balances: interest of [rate] per month on any balance unpaid after the due date, as agreed on [date].

Housecall Pro's flat-fee example is "an additional $25 will be applied after 30 days of nonpayment" (Housecall Pro). Put whatever you pick on the estimate, then repeat it on the invoice. This is not legal advice.

Sam is the AI office manager that never sleeps.

He books jobs, sends invoices, and answers your customers, all by text. He checks with you before anything goes out.

Free plan, no credit card. Sam answers new customers on Pro. Or text (833) 365-7267.

SamYour office manager

Hi, I'm Sam. Text me what you need done and I'll take care of it.

How do I get started?

Deposits: California caps them at $1,000 or 10%, whichever is less, and Maryland at one-third

A deposit covers your materials before you start, but some states limit how much you can take on home improvement work.

  • California. The Contractors State License Board says "the down payment cannot be more than $1,000 or 10 percent of the contract price, whichever is less," and that "there are no exceptions for special-order materials." After that, "the payments to the contractor cannot exceed the value of the work performed" (CSLB).
  • Maryland. State law says a contractor "may not receive a deposit of more than one-third of the home improvement contract price" at or before signing, and may not take any payment before the contract is signed (Maryland Business Regulation 8-617). The Maryland Home Improvement Commission adds that "beyond the initial deposit, the Home Improvement Law does not control the payment schedule" (MHIC).

What those two rules allow on three example job sizes:

Contract priceCalifornia capMaryland cap
$4,000$400$1,333.33
$10,000$1,000$3,333.33
$25,000$1,000$8,333.33

Other states have their own rules or none, so check with your state's contractor licensing board before you set a deposit policy.

The 3-day rule when you sell in the customer's home. The FTC's Cooling-Off Rule gives buyers "three days to cancel certain sales made at your home," and after a cancellation the seller has "10 days to" refund the money (FTC). It does not cover a visit the customer asked for "to repair or perform maintenance on your personal property," or work "needed to meet an emergency." For a remodel you sold at the kitchen table, wait out the three days before you spend the deposit on materials.

On the final invoice, show the deposit as its own line with the date it was paid, then the balance. "Deposit paid October 2: minus $1,000.00" means nobody has to look it up.

What each way to pay costs: card, bank transfer, Zelle, or check

The fastest invoice to pay is one the customer can pay from their phone in a minute. Put every way you take money on the invoice, and add a pay link if your invoicing tool has one.

Here is what each way costs on the $1,335 water heater example, using each company's published US rates:

Way to payPublished rateCost on $1,335
Card through Stripe2.9% + 30¢ (Stripe)$39.02
Bank (ACH) through Stripe0.8%, capped at $5.00 (Stripe)$5.00
Card on a PayPal invoice2.99% + $0.49 (PayPal)$40.41
Bank on a PayPal invoice1%, capped at $10.00 (PayPal)$10.00
Check or cashNo processing fee$0.00

The arithmetic: $1,335 x 2.9% = $38.72, plus 30¢ is $39.02. $1,335 x 0.8% = $10.68, so the $5.00 cap applies. Your rate may differ if you use other software, since many tools add their own fee on top.

Bank transfers cost less but take longer. Stripe says ACH Direct Debit can take "up to 4 business days" to confirm, and its standard ACH settlement is 4 business days, or 2 for eligible US accounts that turn on faster settlement (Stripe ACH). Card payments settle in 2 business days in the US, and a first payout on a new account typically takes 7 to 14 days (Stripe payouts). Zelle says payments to enrolled users "typically occur within minutes," but your bank must offer Zelle for your business account type, and Zelle does not report payments to the IRS, so reporting is on you (Zelle).

Offer bank transfer on big invoices. On a $10,000 job, Stripe's card rate is $290.30, while its ACH rate stops at $5.00.

Adding a card fee takes notice. If you want to pass the card cost to the customer, Visa says "merchants must notify their acquirer 30 days before they begin surcharging" (Visa). States set their own rules too, so ask your card processor first.

Whatever the method, send the invoice before you leave, put the due date and how to pay in the first two lines, and follow up once, politely, the day after the due date.

Progress invoices and change orders on bigger jobs

Jobs that run more than a few days usually get more than one invoice. Bill by stage, and tie each stage to something the customer can see.

For example, on a $12,000 bathroom remodel in California:

StageWhen you billAmount
DepositAt signing$1,000.00
Demolition and rough plumbing doneAfter rough-in inspection$4,000.00
Tile, fixtures, and vanity installedAfter install$5,000.00
FinalAfter walk-through$2,000.00

The deposit is $1,000 because CSLB caps it at the lesser of $1,000 or 10%, and 10% of $12,000 is $1,200. Each later payment should stay at or below the value of the work done so far, since CSLB says payments "cannot exceed the value of the work performed" (CSLB). These are example numbers.

Each progress invoice uses the same template with two extra lines:

This invoice: [stage name], [amount]. Paid to date: [amount]. Contract balance after this payment: [amount]

When the customer asks for extra work, write a change order before you do it, and get a yes in writing. Then bill it on its own line:

Change order 1, approved [date]: [what was added], [amount]

A text or email that says "Yes, add the second outlet for $85" is better than a memory of a conversation. Our guide to how to raise your prices has wording for telling customers about price changes.

Where ServicePro fits

Every ServicePro business, on the Free plan or Pro, can write an invoice on a phone or computer and send it to the customer, emailed with the business's logo and name. You can record cash or a check and the invoice updates. Estimates with options and add-ons go to the customer's phone, and they approve with no login, so the invoice can start from the work they said yes to.

ServicePro does not make a PDF of an invoice, print one, or add sales tax for you, and online card payment is not yet open to every business. If you need a printable template today, copy the one on this page. ServicePro also builds a free website from your Google Business Profile, with a booking page where customers request a time. Get the free website

How this post was made: drafted with AI from the sources linked on this page. Figures and links were checked on November 8, 2026.

Frequently Asked Questions

What should a contractor invoice include?

A contractor invoice should include nine parts: your business and license number, the customer and job address, an invoice number and dates, a one-line job description, materials, labor, other charges such as permits or disposal, any deposit already paid, and payment terms with every way you accept money. Keep materials and labor on separate lines so the customer can check each one against the estimate they approved.

Is Net 30 or due on receipt better for contractors?

For homeowners and same-day repairs, due on receipt is usually best, because the work is done and the customer is home. Net 15 suits bigger homeowner jobs. Net 30 is common for property managers and builders, but it means you carry the cost of materials for a month. Whatever you pick, write the actual due date beside the term on both the estimate and the invoice.

Can a contractor charge a late fee on an invoice?

Usually yes, if the customer agreed to it before the job and the fee follows your state's rules. Housecall Pro advises against adding a late fee to an invoice that is already out. Some states set the rate in law: Texas Property Code Chapter 28 has unpaid amounts owed to a contractor bear interest at 1.5% each month, starting the day after payment was due.

How much deposit can a contractor ask for?

It depends on the state. In California, a home improvement down payment cannot be more than $1,000 or 10% of the contract price, whichever is less, with no exception for special-order materials. Maryland caps a home improvement deposit at one-third of the contract price. Many other states set their own limits or none, so check with your state's contractor licensing board first.

What does it cost to take a card payment on an invoice?

Stripe's published US rate for domestic cards is 2.9% + 30¢, which is $39.02 on a $1,335 invoice. Stripe's ACH bank payments cost 0.8%, capped at $5.00. PayPal invoicing charges 2.99% plus $0.49 for cards and 1%, capped at $10.00, for bank payments. Software built on these processors may add its own fee, so check your tool's price page.

How fast does an ACH payment reach my bank?

Stripe says an ACH Direct Debit payment can take up to 4 business days to confirm, and its standard ACH settlement is 4 business days, or 2 for eligible US accounts that turn on faster settlement. Then the money moves to your bank on your payout schedule. A first payout on a new Stripe account typically takes 7 to 14 days. Zelle payments to enrolled users typically arrive within minutes, if your bank offers Zelle for business accounts.

Pick your trade

Tim Wheeler, co-founder of ServiceProDaniel Holliday, co-founder of ServicePro

“Service pros don’t need another piece of software. They need a system that helps them win online: get found on Google, book the job, and get paid. That’s what we built, and Sam runs it for you by text.”

Tim Wheeler & Daniel Holliday · Co-founders, ServicePro

Meet Sam →

Send your first invoice from your phone.

Add the customer, the work, and the price, then send it. You see who has paid, and invoices are on the Free plan.

Free plan · No credit card

Or talk to a co-founder first. Book a call