Electrician Invoice Template: Copy It, Plus a Worked Example
For every trade: Contractor Invoice Template: 9 Parts, a Copy-and-Paste Example
An electrician invoice template has 10 lines, starting with your license number
An electrician invoice needs 10 lines: your business and license number, the customer and job address, the invoice number and dates, the job, materials, labor, the permit, any deposit, the balance due, and how to pay. Copy the template below, fill in the brackets, and send it before you leave the job.
INVOICE [number]
From: [Business name], [mailing address], [phone], [email]. License: [state license number]
To: [Customer name], [billing address]. Job address: [where you did the work]
Invoice date: [date]. Work done: [date or dates]. Due: [terms], [due date]
Job: [one plain sentence that matches the estimate the customer approved]
Materials: [part], [quantity], $[amount]. One line for each part
Labor: [hours] hours at $[rate], or flat price $[amount]
Permit: [city or county] permit [number], $[amount]
Subtotal: $[amount]. Sales tax: $[amount], only if your state taxes this work
Deposit received [date]: minus $[amount]
Balance due: $[amount]
Pay by: card at [pay link], bank transfer to [account details], check to [business name] at [mailing address], or cash
Late fee: [the terms the customer agreed to before the job, or leave this line off]
Sales tax and the late fee are optional. Add tax only if your state taxes the work, and a late fee only if the customer agreed to it before you started.
Our guide on how to write and send an invoice covers numbering, sending, sales tax, and how long to keep invoices. This page covers what is different for electricians: license rules, permits, and a worked EV charger example.
What every electrical invoice needs, line by line
Each line answers a question the customer will otherwise call you about. Stripe's invoice guide says to "assign a unique identification number to each invoice," that "a common practice is to use sequential numbers," and to "clearly state the terms of payment." The template does all three.
| Line | What to write |
|---|---|
| Business and license | Name, address, phone, email, and license number |
| Customer and job address | Who pays, and where the work was, since landlords often pay from another address |
| Number and dates | A number you never reuse, the invoice date, the work date, and the due date |
| Job | One plain sentence that matches the approved estimate |
| Materials | Each breaker, cable run, and device, with a price |
| Labor | Hours and rate, or one flat price |
| Permit | The city or county, the permit number, and the fee |
| Deposit | The date and amount already paid |
| Balance due | The total minus any deposit, in bold |
| How to pay | Pay link, bank transfer, and check address |
Write the job the way the customer would say it. "Installed a 50-amp circuit for the EV charger in the garage" gets paid. "Electrical services" gets a phone call.
Texas and Florida require your license number on the paperwork
Some states say what must be on an electrician's invoice. Check yours before you send one.
- Texas. The TDLR electricians compliance guide says the following "is required to be on all proposals, invoices, and written contracts proposed by the contractor": the contractor's name, address, phone number, and license number. Invoices and written contracts must also carry the TDLR notice below, word for word.
- Florida. Section 489.521(7)(b) of the Florida Statutes says the registration or certification number of a contractor "shall be stated in each offer of services, business proposal, or advertisement, regardless of medium." Put it on the estimate and the invoice, and you are covered on both.
The Texas line, ready to paste at the bottom of an invoice:
Regulated by The Texas Department of Licensing and Regulation, P.O. Box 12157, Austin, Texas, 78711, 1-800-803-9202, 512-463-6599; website: www.tdlr.texas.gov/complaints
The same TDLR guide asks for the "TECL" prefix before your number in the lettering on your truck. It doesn't mention the prefix for invoices (TDLR).
Other states have their own rules. Ask your licensing board what has to appear on an invoice, and keep the license line on every one even where it isn't required.
A worked example: a 50-amp EV charger circuit in Rockville, Maryland
Here is the template filled in for a common residential job. The materials, labor rate, and deposit are example numbers to show the arithmetic, not prices to charge. The permit fee is real: the City of Rockville charges $35.00 per EV charging fixture or outlet, effective July 1, 2026 (City of Rockville Resolution 08A-26).
Sarah M. bought a Level 2 charger for her new car and needs a 240-volt outlet in the garage. Dave, an electrician who works alone, pulls the permit, takes a $250 deposit to cover parts, and does the work on a Wednesday.
INVOICE 3108
From: Dave's Electric, [mailing address], Rockville, MD, [phone], [email]. License: [Maryland license number]
To: Sarah M., [billing address]. Job address: same
Invoice date: November 5, 2026. Work done: November 5, 2026. Due: Net 15, November 20, 2026
Job: Installed a 240-volt, 50-amp circuit and a NEMA 14-50 outlet in the garage for the customer's EV charger. City of Rockville permit [number]
| Line | Amount |
|---|---|
| 50-amp 2-pole breaker | $45.00 |
| 6/3 copper cable, 35 feet | $140.00 |
| NEMA 14-50 outlet, box, and cover | $40.00 |
| Straps, connectors, and conduit | $20.00 |
| Labor: 4 hours at $120.00 | $480.00 |
| City of Rockville EV charging permit, 1 outlet | $35.00 |
| Subtotal | $760.00 |
| Deposit received October 30, 2026 | minus $250.00 |
| Balance due | $510.00 |
Pay by: card at [pay link], bank transfer to [account details], or check to Dave's Electric at [mailing address].
Late fee: 1.5% per month on any balance unpaid 15 days after this invoice, as agreed on the estimate.
Check the math: materials $45 + $140 + $40 + $20 = $245, labor 4 x $120 = $480, subtotal $245 + $480 + $35 = $760, and $760 minus the $250 deposit = $510.
The permit number gives Sarah proof the work was permitted. The late fee is in bold because Maryland wants late fees shown in bold type, as the late fee section explains.
Bill materials, labor, and permits on separate lines
Separate lines answer what customers ask most: what the parts cost, how long it took, and what the city charged.
Materials. List each breaker, cable run, and device with its price. If you mark up parts, put the marked-up price on the line. A separate "markup" line reads as a fee.
Labor. Pick hourly or flat and stick to it. Hourly shows hours and rate ("4 hours at $120.00"). Flat shows one price. Your rate has to cover more than wages: the median wage for electricians was $30.38 an hour in May 2025 (BLS), and what you bill also pays for the truck, insurance, tools, and time spent driving and quoting.
Permits. Bill the permit at what the city charged, on its own line, with the permit number. Fees vary by job, even in one city. Rockville's schedule, for example (City of Rockville):
| Rockville electrical permit | Fee |
|---|---|
| EV charging, per fixture or outlet | $35.00 |
| Dedicated circuit, first unit | $80.00 |
| Each additional dedicated circuit | $20.00 |
| Service, not over 225 amp | $100.00 |
| Minimum fee, unless otherwise provided (excludes EV charging) | $80.00 |
Rockville also adds a 10.25% automation fee to permit fees, except EV charging. So a service upgrade of 200 amps costs $100.00 + $10.25 = $110.25 in permit fees, and that is the number to put on the invoice. These are one city's fees. Look up your own city or county schedule before you quote.
Payment terms: due on receipt, Net 15, or Net 30
Payment terms say when the money is due. Agree on them on the estimate, then repeat them on the invoice, so nothing on the bill is a surprise.
| Terms | What it means | Use it for |
|---|---|---|
| Due on receipt | Pay when the invoice arrives | Service calls and same-day repairs |
| Net 15 | Pay within 15 days of the invoice date | Homeowners on bigger jobs, like the EV circuit above |
| Net 30 | Pay within 30 days of the invoice date | Builders, property managers, and businesses that ask for it |
Stripe calls due on receipt a Net 0 term, meaning "the customer must provide immediate payment when the goods or services are delivered" (Stripe).
Always write the date next to the term: "Net 15, November 20, 2026." A customer who sees only "Net 30" may count from the day they open the email.
Net 30 means you carry the job for a month. Dave paid the $35 permit before he started, and on Net 30 he would wait until December 5, 2026 for the $510 balance. If a builder asks for Net 30, ask for Net 15 first. Stripe also suggests a small discount of 1% to 2% for early payment (Stripe).
Sam is the AI office manager that never sleeps.
He books jobs, sends invoices, and answers your customers, all by text. He checks with you before anything goes out.
Free plan, no credit card. Sam answers new customers on Pro. Or text (833) 365-7267.
Hi, I'm Sam. Text me what you need done and I'll take care of it.
How do I get started?
Late fees must be agreed first, and Maryland sets the limit
A late fee you add after the job is a fee the customer will fight. Housecall Pro says late fees are "generally allowed as long as you clearly include them in your terms upfront," and that "late fee limits, interest rules, and grace period requirements vary by state."
Maryland is a clear example. For a consumer contract, meaning work for personal, family, or household purposes, Maryland Commercial Law section 14-1315 lets the late fee follow one of two limits:
- Up to $5 per month, or up to 10% per month of the past-due amount, whichever is greater, with no more than 3 monthly late fees for any single past-due amount.
- Or up to 1.5% per month of the past-due amount.
The same section says the fee must be disclosed "in the consumer contract or by notice, in size equal to at least 10-point bold type," and that a late fee generally "may not be imposed until 15 days after the date the bill was rendered" (Maryland Code). That is why Dave's example invoice shows the late fee in bold and starts it 15 days after the invoice.
On the $510 example, 1.5% per month is $7.65 a month. Put the late fee on the estimate the customer approves, then repeat it on the invoice:
Late fee: [rate] per month on any balance unpaid [number] days after the invoice date, as agreed on the estimate dated [date].
Other states set different limits. Check yours before you add one. This is general information, not legal advice.
Deposits on electrical work, and California's $1,000 cap
A deposit pays for parts before you start and shows the customer is serious. Some states limit how much you can take on home improvement work, so check whether your state's rule covers electrical jobs.
California has the clearest rule. The Contractors State License Board says "the down payment cannot be more than $1,000 or 10 percent of the contract price, whichever is less," that there are no exceptions for special-order materials, and that after the down payment "the payments to the contractor cannot exceed the value of the work performed" (CSLB).
The cap bites hardest on small jobs. For example:
| Job (example prices) | 10% of price | Largest deposit in California |
|---|---|---|
| $760 EV charger circuit | $76.00 | $76.00 |
| $4,500 panel replacement | $450.00 | $450.00 |
| $15,000 whole-house rewire | $1,500.00 | $1,000.00 |
So Dave's $250 deposit from the Maryland example would be too much in California. There, he would take $76 at signing and bill the rest when the work is done.
Show the deposit as its own line with the date it was paid. On a job billed in stages, such as rough-in and then final after inspection, keep each bill at or below the value of the work done so far. Rules differ by state, so check yours.
Get paid faster with a card link or a bank transfer
The fastest invoice to pay is one the customer can pay from their phone the day you finish. Four habits help:
- Send it before you leave. Walk the customer through the work, then send the invoice from the driveway.
- Put the pay link first. If your invoicing tool gives you a card pay link, make it the first way to pay.
- Offer a bank transfer for big bills. On a panel upgrade, ACH costs far less than a card.
- Write the due date, not just the term. "Due November 20, 2026" leaves nothing to count.
Here is what each way costs on Dave's $510 balance at Stripe's published US rates, which are 2.9% + 30¢ per domestic card charge and 0.8% capped at $5.00 for ACH Direct Debit:
| Way to pay | Rate | Cost on $510 | Cost on $760 |
|---|---|---|---|
| Card | 2.9% + 30¢ | $15.09 | $22.34 |
| Bank transfer (ACH) | 0.8%, capped at $5.00 | $4.08 | $5.00 |
| Check or cash | No processing fee | $0.00 | $0.00 |
As an example of the math: $510 x 2.9% = $14.79, plus 30¢ is $15.09. On $760, 0.8% is $6.08, so the $5.00 cap applies. Other processors charge different rates.
When the due date passes, send one polite reminder with the pay link. Our electrician marketing guide covers winning the next job, and electrician leads covers where those jobs come from.
Where ServicePro fits
ServicePro is home services software. Every business on it, Free or Pro, can write an invoice on a phone or computer, email it with the business's logo, and mark it paid when cash or a check comes in. Estimates with options and add-ons go to the customer's phone, and they approve with no login. Card payments through a pay link are switched on one business at a time, so ask about them when you sign up.
ServicePro does not make a PDF of an invoice, print one, add sales tax, or add a late fee. If your state requires a license line or a notice on the invoice, as Texas does, use this template for those jobs. It also builds a free website from your Google Business Profile, with a booking page where customers request a time. Compare tools in electrical contractor software. Get the free website
How this post was made: drafted with AI from the sources linked on this page. Figures and links were checked on November 8, 2026.
Frequently Asked Questions
What should an electrician invoice include?
An electrician invoice needs 10 lines: your business and license number, the customer and job address, the invoice number and dates, the job, materials, labor, the permit, any deposit, the balance due, and how to pay. Add sales tax only if your state taxes the work, and a late fee only if the customer agreed to it first.
Do electricians have to put their license number on invoices?
In Texas, yes. TDLR says the contractor's name, address, phone number, and license number must be on all proposals, invoices, and written contracts, and invoices must also carry TDLR's "Regulated by" notice with its phone numbers and complaints website. Florida requires the number on each offer of services, business proposal, or advertisement. Other states differ, so ask your licensing board, and keep the number on every invoice anyway.
How much deposit can an electrician ask for?
It depends on the state. In California, the Contractors State License Board says the down payment on home improvement work cannot be more than $1,000 or 10 percent of the contract price, whichever is less, with no exceptions for special-order materials. On a $760 job, that is $76. Other states set different limits or none, so check your state's rule before you set a deposit policy.
Can an electrician charge a late fee on an invoice?
Yes, if the customer agreed to it before the job and your state allows it. In Maryland, a late fee on household work can be up to 1.5% per month, or the greater of $5 or 10% per month, with no more than 3 monthly fees on one past-due amount. It must be shown in at least 10-point bold type and can't start until 15 days after the bill. Rules vary by state, and this is not legal advice.
Should the permit fee go on an electrical invoice?
Yes. Put it on its own line with the city or county name and the permit number, at the amount the city charged. For example, the City of Rockville, Maryland charges $35.00 per EV charging outlet and $100.00 for a service up to 225 amps, plus a 10.25% automation fee on non-EV permits, under its fee schedule effective July 1, 2026.
What does Net 15 mean on an electrician invoice?
Net 15 means payment is due within 15 days of the invoice date. Net 30 means 30 days, and due on receipt means the customer pays when the invoice arrives, which Stripe calls Net 0. Write the actual date next to the term, such as "Net 15, November 20, 2026," so the customer doesn't count from the day they open it.
How much does it cost to take a card payment on an invoice?
At Stripe's published US rates, a domestic card payment costs 2.9% + 30¢, and an ACH bank transfer costs 0.8%, capped at $5.00. On a $510 invoice, a card costs $15.09 and ACH costs $4.08. On a $760 invoice, ACH hits the $5.00 cap. Other processors charge different rates, so check yours.

